Billboard Dimensions: Standard Sizes for Every Format

Billboard dimensions explained: bulletin 14x48, 30-sheet poster, junior poster and digital pixel sizes, plus artwork scale, bleed and file specs for designers.

The standard US highway billboard, called a bulletin, is 14 feet high by 48 feet wide, or 672 square feet of ad space. The next most common size is the 30-sheet poster at roughly 10'5" x 22'8", followed by the junior poster (also called an 8-sheet) at about 5' x 11'. Digital billboards come in those same physical sizes but are designed in pixels. Below are the dimensions you will actually see on a media kit, plus the file specs your designer needs.

Standard billboard dimensions at a glance

These are the formats most US small and mid-size advertisers will be offered. Sizes can vary by a few inches between operators and markets, so always ask for the spec sheet for the exact board you book.

FormatTypical live area (H x W)Where you find itTypical 4-week price range*
Bulletin14' x 48' (672 sq ft)Interstates, highways, major arterial roads$1,500 to $30,000
Digital bulletin14' x 48' screen (also 10'6" x 36')High-traffic highways and city corridors$3,500 to $25,000
Poster (30-sheet)10'5" x 22'8"Primary and secondary roads in towns and cities$750 to $4,000
Junior poster (8-sheet)About 5' x 11' (panel often listed as 6' x 12')Neighborhood streets, building sides, near eye level$300 to $750
Spectacular / wallscapeCustom (examples: 20' x 60')Dense downtowns, building wallsQuoted per site

*Price ranges are AdQuick's published US averages for a 4-week cycle, not quotes. Rural boards can come in lower and premium urban sites much higher. See our billboard cost guide or run the numbers in the cost calculator.

Bulletins: the 14 x 48 standard

The bulletin is what most people picture when they hear "billboard." Lamar describes its bulletins as typically 14 feet high and 48 feet wide, giving 672 square feet for your ad. You will also see other bulletin sizes in some markets, including 10'6" x 36' and 12' x 25', and oversized 20' x 60' structures.

Two details trip up first-time buyers:

  • Bleed. According to the OAAA print specification sheet, bulletin vinyl wraps generally need 6 inches of bleed on all four sides. That makes the printed piece for a 14' x 48' board about 15' x 49', even though viewers only see 14' x 48'.
  • Extensions. Some boards allow cut-outs that break the frame. Lamar lists extensions of up to an extra 5 feet at the top, 2 feet at the side and 1 foot at the bottom. They cost extra and have their own specs, so confirm before your designer uses them.

Posters and junior posters: smaller boards, closer viewers

The 30-sheet poster gets its name from the days when the design was pasted up in 30 paper sheets. Today it is usually one printed polyethylene or paper sheet. The OAAA spec sheet lists the live and finished area as 10'5" x 22'8" (125" x 272"). Media sellers often round this to "10 x 22" or list 10'6" x 22'9", which is why you should design to the operator's spec sheet, not a rounded number.

Posters sit on city and suburban roads where traffic moves slower, so they suit local businesses that want to reach people within a few miles of a store. Junior posters (8-sheets) are smaller still and are often mounted on building sides or low structures near eye level. AdQuick lists them at 6' x 12' overall, while its answers page puts the visible area at about 5' x 11'. They suit restaurants, clinics and retailers targeting walk-by and neighborhood traffic.

Digital billboard sizes and pixel dimensions

A digital bulletin is the same physical size as a static one, but you deliver a digital file instead of vinyl. The catch is that the pixel count is much lower than you might expect. The OAAA cheat sheet lists digital bulletins (14' x 48' and 10'6" x 36') at roughly 1400 x 400 pixels and digital posters at roughly 840 x 400 pixels. Many screens differ from those figures, and newer high-resolution faces and street-level screens may use standard 1920 x 1080 layouts, so the operator's spec sheet always wins.

Other digital details to confirm before you design:

  • Exact pixel width and height for that specific screen
  • Accepted file types (usually JPG or PNG for static ads)
  • Spot length and how many advertisers share the loop
  • Whether animation or motion is allowed (many states restrict it on roadside boards; see our regulations guide)

Not sure whether a digital or static face fits your budget? Our post on static vs. digital billboards walks through the tradeoffs.

Artwork specs: how to set up a billboard file

Nobody designs a billboard at full size. Designers work at a scale, then the printer enlarges it. The OAAA spec sheet recommends these setups:

FormatScaleDocument sizeResolution at that size
Bulletin 14' x 48' (with bleed)1 inch = 1 foot15" x 49"216 to 240 ppi
Bulletin 10'6" x 36' (with bleed)1 inch = 1 foot11.5" x 37"216 to 240 ppi
30-sheet poster1/1012.5" x 27.2"180 to 200 ppi

Once enlarged, that works out to roughly 18 to 20 pixels per inch on the finished board, which looks sharp from the road. If you do not have a designer, a template tool such as Canva lets you set custom dimensions at scale; just confirm the final file against the printer's spec sheet before you send it.

Checklist before you send artwork

  1. Get the official spec sheet for the exact board or screen you booked.
  2. Confirm live area, bleed and any extension or cut-out dimensions.
  3. Set your document to the specified scale and resolution.
  4. Keep copy short: one message, a logo and one call to action. Our creative guide has more tips.
  5. Check the design at thumbnail size; if it reads small on your phone, it will read at highway speed.
  6. For digital, export at the exact pixel dimensions and test on a dark background.
  7. Ask the operator for the production and posting deadlines so the vinyl or file arrives on time.

Next steps

Pick the size that matches your audience first: bulletins for broad highway reach, posters and junior posters for neighborhood reach. Then compare prices and availability. You can browse inventory and request proposals on marketplaces such as AdQuick, or go direct to local operators.

Some links are partner links; we may earn a commission at no extra cost to you. Prices are typical planning ranges, not quotes.

Written and reviewed by our out-of-home experts, Andrew Gerardi and Scott Blaine Hoffman. Meet the team →

Price out your campaign

Plug in impressions, CPM and flight length to see a realistic budget.

Open the OOH cost calculator
Founded by Scott Blaine Hoffman, a founding partner of ReceptaSign street-kiosk advertising

Stay in the loop with Advertise Outdoors

Outdoor advertising rates, ideas and new formats, one email a week.

Contact: scott@appliedresults.com
Privacy Policy · © 2026 Advertise Outdoors